10.0.0.1

10.0.0.1 is the default IP address of cable routers and modems. Most notable it is the default gateway address of Xfinity routers. Some other brands that use 10.0.0.1 as default router IP address for cable, broadband routers and modems are Agere, Airlink, Arris, Aztech, Cisco, Lucent, Proxim, Technicolor.

Login to 10.0.0.1 Router Admin Panel

All routers that have 10.0.0.1 as default router gateway IP address can be connected via browser.

To open router admin settings page, open your favorite browser and type 10.0.0.1 in browser url bar and press Enter key. Remember to not use http or https infront of ip address. It is advisable to use laptop or desktop computer for managing router settings. If your network is working, browser will connect with router and open router login page.

On router login page, type in username and password in input fields and click on Login button. If username and password are correct, you will log into router console straight away. If username and password are wrong, you will get error message saying login credentials are incorrect. In this case, try to use default username and password. If you do not have access to default username and password, you can get it from here. In case if you have changed password in past, default username and password will not work. In suck scenario, try to reset router using reset button available on router. It will delete current router configuration and reset all settings to factory default. Then you can use default username and password to log into router setting page.

After logging in, browser will show router setting page having different tabs for LAN, WAN, Wifi etc settings.

Routers / Modems with 10.0.0.1 IP Address

  • ALFA Network AP51
  • Agere ORiNOCO AP-2000 AE
  • Airlink101 AP411W
  • Arris TG1682G
  • Aztech NA8300
  • Cisco 881-W
  • Cisco AIR-AP340 (AIR-AP342E2CUS)
  • Cisco DPC3939
  • Cisco DPC3941
  • Lucent ORiNOCO AS-2000
  • Proxim ORiNOCO AP-2000
  • SMC SMCD3GNV (Comcast)
  • SMC SMCD3GNV v2
  • SMC SMCD3GNV3
  • Technicolor TC8717C
  • Technicolor TC8305C
  • Technicolor TC8706C (Comcast)

Common 10.0.0.1 Problems

Can’t Connect to 10.0.0.0.1

If you are trying to connect to 10.0.0.0.1 ip address, you will never ever connect as this is wrong ip address. Correct ip address is 10.0.0.1.

10.0.0.1 Refused to Connect to Xfinity Router

If you are getting any such error, it means either network is down or there is no device on local area network with ip 10.0.0.1. It is always better to connect to router through Ethernet cable while troubleshooting.

Comcast IP 10.0.0.1 Taking Long to Respond
This means either device can not reach Comcast default gateway on 10.0.0.1 or device is malfunctioning. Make sure that connection to Comcast device is up and it is available on ip 10.0.0.1. Try to reboot router and connect again after sometime.

10.0.0.1 IP Address Restrictions

10.0.0.1 is private ip address decided by the IETF and IANA. It is not available on public network. It is only visible inside private network. As this ip address is assigned to routers and modems, do not try to use it for any other device laptop or desktop in your network. Also as it is private ip, it is not accessible from outside local network.

Changing 10.0.0.1 To Other IP Address

This is ip address is hardcoded in router or modem firmware and as such you can not change it to other ip address like 192.168.2.1, 192.168.100.1